Arris Touchstone TM501 Guia do Utilizador descarregar pdf (Página 15)

Touchstone™ TM501 Telephony Modem User’s Guide 15

Getting Ethernet

Safety Started Installation Configuration Usage Troubleshooting Glossary

Mounting the Telephony Modem

You can either mount the Telephony Modem on a wall or place it on a desktop. For

wall-mount applications, you can mount the Telephony Modem with the indicators

facing upward (vertical) or to the size (horizontal).

Tools and Materials

For wall-mounted installations, make sure you have the following tools and mate-

rials before proceeding:

•for mounting on drywall: Two 1/4” (6mm) drywall anchors and a drill with

1/4” (6mm) bit (not included)

•for mounting on plywood or studs: two #6 x 1.5” (38.1 mm) self

tapping

screws (included)

• screwdriver (flat-blade or Phillips, depending on what kind of screws you

use)

•wall-mount template (included with the Telephony Modem Quick Installation

Guide)

•transparent tape (for temporarily securing the mounting template to the

wall)

Location

Always position the Telephony Modem:

•within reach of an AC outlet. The power cord must reach the outlet without

stretching and without adding extension cords.

• near a cable outlet (to avoid long cable runs).

Note:

When mounting the Telephony Modem on drywall, try to position the Te-

lephony Modem so at least one of the screws are fastened to a stud. This

may prevent the Telephony Modem from pulling out of the wall in the

future.

To prevent overheating of the Telephony Modem, do not block the ven-

tilation holes on the sides of the unit.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 40 41

Sem comentários

Arris Touchstone TM501 Guia do Utilizador Página 15