Arris Touchstone WECB460 Guia de Instalação descarregar pdf (Página 8)

Connecting the WECB460 Wi-Fi MoCA Bridge

Using the WECB460 Wi-Fi MoCA Bridge and existing coax or Ethernet cab les

you may extend the range of your wireless network and reduce “dead spots” in

the house in locations where the gateway/access point signal is weak.

Option 1: Connecting to a MoCA Enabled Network

Requirement: You must have a MoCA enabled router or gateway installed

that is capable of processing MoCA signals on the home coaxial cable RF

network to install the WECB460 Wi-Fi MoCA Bridge in this configuration.

Connecting to a MoCA enabled network is the most common installation. The

following diagram shows a typical installation.

You must have a MoCA POE (Point of Entry) filter

installed within inches of the first multi-way RF splitter

feeding the RF wiring in your home. This is required to

isolate MoCA signals in the home.

You should also install a MoCA filter on any non-MoCA

devices, such as a set top box, that will be connected to

the coax network to avoid interference-related

performance issues on these devices.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Sem comentários

Arris Touchstone WECB460 Guia de Instalação Página 8